Accessories

  1. Full Twist Grip Throttle

    Full Twist Grip Throttle

    Learn More

    A$25.00
  2. REAR DROP-OUT LEFT AND RIGHT TORQUE ARM SET. (FITS CRYSTALYTE HUB MOTORS).

    All of our stainless steel torque arms are currently laser cut in Australia and assembled and finished. We use thick 6mm stainless steel plate with anti-rotation slot and nylon lock nuts stainless steel fasteners as well. Torque arms are used to prevent axle rotation in hub motors. When a hub motor is powered up running, for all the torque that the motor generates spinning a wheel forwards, there is an equal and opposite torque on the axle causing it to rotate backwards "Newton's Third Law ". In most electric bicycle hub motors, the axle is machined with flats on either side which key into the dropout slot and provide some measure of support against rotation. In many cases this is sufficient. However, in high power systems 500 watts and upwards it will generate a lot of torque, or in setups with weak dropouts, the forces present can exceed the material strength and pry the dropout open. When that happens, the axle will spin freely, wrapping and severing off the motor cables and potentially causing the wheel to fall right out of the bike. Rear Torque Arm: 6 mm Thick Suit 10mm Hub Motor Axle. Stainless Steel.

    Learn More

    A$85.00
  3. 16 Tooth Single Speed Freewheel

    16 Tooth Single Speed Freewheel

    Learn More

    A$25.00
  4. 24" double rim, black (Sample Picture Only)

    24" double rim, black (Sample Picture Only)

    Learn More

    A$75.10
  5. FUSE HOLDER WITH ANDERSON PLUG 40 AMP

    FUSE HOLDER WITH ANDERSON PLUG 40 AMP WITH BLADE FUSE

    Learn More

    A$15.00
  6. FUSE HOLDER WITH INSULATED TERMINALS 50 AMP

    FUSE HOLDER WITH INSULATED TERMINALS 50 AMP

    Learn More

    A$15.00
  7. Thumb Throttle

    Thumb Throttle

    Learn More

    A$25.00
  8. Temperature sensor wire

    2 pin temperature sensor red wire form hub motor to controller Cable length:100 cm, Male and female connectors.

    Learn More

    A$12.00
  9. Push Button (regen braking)

    Push Button (regen braking)

    Learn More

    A$25.00
  10. FRONT FORK LEFT AND RIGHT TORQUE ARM SET (FITS CRYSTALYTE HUB MOTORS).

    All of our stainless steel torque arms are currently laser cut in Australia and assembled and finished. We use thick 6mm stainless steel plate with anti-rotation slot and nylon lock nuts stainless steel fasteners as well. Torque arms are used to prevent axle rotation in hub motors. When a hub motor is powered up running, for all the torque that the motor generates spinning a wheel forwards, there is an equal and opposite torque on the axle causing it to rotate backwards "Newton's Third Law ". In most electric bicycle hub motors, the axle is machined with flats on either side which key into the dropout slot and provide some measure of support against rotation. In many cases this is sufficient. However, in high power systems 500 watts and upwards it will generate a lot of torque, or in setups with weak dropouts, the forces present can exceed the material strength and pry the dropout open. When that happens, the axle will spin freely, wrapping and severing off the motor cables and potentially causing the wheel to fall right out of the bike. Front Fork Torque Arm: 6 mm Thick Suit 10mm Hub Motor Axle. Stainless Steel.

    Learn More

    Regular Price: A$85.00

    Special Price: A$50.00

  11. On & Off Switch

    On & Off Switch

    Learn More

    A$50.00
  12. Split Twist Grip Throttle

    Split Twist Grip Throttle

    Learn More

    A$25.00
  13. 7 Speed Gear Freewheel

    7 Speed Gear Freewheel

    Learn More

    A$30.00
  14. 8 Speed Gear Freewheel

    8 Speed Gear Freewheel

    Learn More

    A$30.00
  15. Stainless Steel Spacer for Disk Calliper Clearance

    Stainless Steel Spacer for Disk Calliper Clearance 1.00 mm. Stops the break calliper rubbing on the hub motor and increases clearance.

    Learn More

    A$6.00
   WARRANTY 12 month
 FAST SHIPPING 
 Need help? 0427 770 768