SAW 408 Rear Wheel hub motor with 26" Double Wall Rim, G12 spokes. Off-road Only.

Remark on 400 series motor :
Permanent magnet direct driver / gear less hub motor,
High grade NdFeB Magnets,
Sheet type lamination with deep slot,
High quality hall effect sensors,
NSK sealed bearing,
Cover with stainless Torx screw,
Recommended controller: 36V - 48V 25A
Plug in hall effect hall effect and motor phase connector,
 
Motor Laced with 26" wheel
Anderson Plug

Availability: In stock

A$369.00
Anderson plug connector for motor phase and small XRL connector for hall effect sensor
Motor speed record base on 36V system with 26" wheel, While motor hookup with 48V the speed will increase.
Motor test base on 25A controller. While controller's current increase the torque will increase too. Max. current 40A
to hookup the 400 series motor
Rear Axle Dropout (mm ) 135mm
Front Axle Dropout (mm ) 100mm
Voltage range 36v-48v
Recommended controller: 36V - 48V 25A
Anderson Plug

Use spaces to separate tags. Use single quotes (') for phrases.

   WARRANTY 12 month
 FAST SHIPPING 
 Need help? 0427 770 768